- Send Us Email
- response@biopromindia.com
- Saving Upto 60% On Fuel Cost
Wood Biomass Air Bio Pid Temperature Controllers
Air Bio Pid Temperature Controller
Central heating pump (CH). Ash removal mechanism. Hot Water Pump (HWP). Auger pellet receiver. Fuel auger.
AIR BIO PID Temperature Controller is designed for control of the Central Heating Boiler equipped with the burner and worm feeder. The Controller controls gradual change of the fan power by switching on the Central Heating pump and hot water supply. AIR BIO PID can be used in pellet burners with automatic firing. Owing to the capability of connecting expansion modules to AIR BIO PID Controller via RS 485 interface, the Controller is able to operate the mixer valve of three-or-four-way valve and the additional mixing pump, frequency converter (for powerful pumps) as well as it is able to control the level of fuel in the bunker. In addition, GSM module can be connected to the Controller, and this module is used for control of the boiler operation through mobile network
| Temperature setting range: | from 40 °C to 90 °C |
| Accuracy of measurement: | ±2 °C |
| Power supply of the controller: | 230 V ±10% |
| 50 Hz | |
| Operating temperature: | from 10 °C to 50 °C |
| Temperature of sensors measurement: | from 0 °C to 95 °C |
| Power consumption: | 6 W |
| Maximum fan power: | 300 W |
| Maximum pump power: | 200 W |
| Resistance of the temperature sensor: | from -55 °C to +150 °C |
| Weight: | 1,5 kg |
| Safety insert: | 10 A |